Skip to main content
REPORT OUTAGE: 800-776-0493

Member-Owned Distributed Generation Application

This application should be completed as soon as possible and returned to the Whitewater Valley REMC in order to begin processing the request for a member owned solar distributed generation facility. See Distributed Generation Procedures and Guidelines Manual for Members for additional information.

Member-Owned Distributed Generation Application

Owner/Applicant Information

Type of Generation:

Estimated Load, Generator Rating and Mode of Operation Information

The following information is necessary to help properly design the Cooperative member interconnection. This information is not intended as a commitment or contract for billing purposes.
Mode of Operation

Project Design/Engineering (Architect) (as applicable)

Electrical Contractor (as applicable)

Description of Proposed Installation and Operation

Give a general description of the proposed installation, including a detailed description of its planned location, the date you plan to operate the generator, the frequency with which you plan to operate it and whether you plan to operate it during on or off-peak hours.

Inverter Data (if applicable)

Type Commutation

Note: Attach all available calculations, test reports, and oscillographic prints showing inverter outputvoltage and current waveforms.

Maximum file size: 33.55MB

AC Safety Disconnect Switch

Open/Close Energy (select one):

Additional Information

In addition to the items listed above, please attach a detailed one-line diagram of the proposed facility, all applicable elementary diagrams, major equipment, (generators, transformers, inverters, circuit breakers, protective relays, etc.) specifications, test reports, etc., and any other applicable drawings or documents necessary for the proper design of the interconnection. Also describe the project’s planned operating mode (e.g., combined heat and power, peak shaving, etc.), and its address or grid coordinates.

Maximum file size: 33.55MB

The customer agrees to provide Whitewater Valley REMC with any additional information required to complete the interconnection. The customer shall operate his equipment within the guidelines set forth by the cooperative.